|
CA-310 Volumetric 卡式微量水份計 CA-310型 (容積法) |
人氣指數 |
3530 |
|
 |
| 型號：CA-310 Volumetric |
| 中文名稱：卡式微量水份計 CA-310型 (容積法) |
| 英文名稱：Karl-Fischer Volumetric titration |
| 廠牌：日東精工分析科技 |
| 供應商：翔貿儀器有限公司 中央製作所 台灣總代理 |
|
|
|
|
|
|
|
商 品 說 明 資 料 |
 |
|
|
 商品規格 |
|
商品名稱：
|
卡式微量水份計 CA-310型 (容積法)
Karl-Fischer Volumetric titration
《可四頻道同時測定、同時表示》
|
|
特點：
|
♦ 擴充功能與多種的搭配應用，最大4頻道同時測量
♦ 觸控式彩色液晶螢幕控制
♦ 可用於多種應用，從簡單的批量測量到全自動化
♦ 適用於多種廣泛的應用，藥品、食品、油品...等
|
|
螢幕：
|
8.4英吋彩色液晶觸控式螢幕 |
|
重量：
|
主機 CA-310MC: 約 2kg
攪拌座 CA-310STR: 約 2.5kg
Burette CA-310BRT:約 3.5kg |
|
尺寸：
|
主機 CA-310MC: 約 245 W× 160 D× 215 Hmm
攪拌座 CA-310STR: 約 120 W× 340 D× 135 Hmm
Burette CA-310BRT:約 110 W× 320 D× 275 Hmm |
| |
| |
卡氏水份計;卡氏微量水份計;水份計;水份儀;水份測定儀;水分測定儀;水分分析儀;水份分析儀;卡式微量水分計;微量水分儀;微庫倫水分測定器;微庫倫水份測定器;分析儀;三菱化學;水分測定器;三菱化學台灣總代理;水份測定器;CA-310;Karl-Fischer Moisture Meter;Mitsubishi Chemical Analytech Co Ltd;卡氏水分計;卡氏水分儀;卡氏水份測定儀;微量水份分析儀;微量水份計;卡式水份儀;三菱化學分析科技-台灣總代理;水分計；水份計；水分測定器；水份測定器；水分測定儀；水份測定儀；水分分析儀；水份分析儀；卡氏水分計；卡氏水份計；卡式水分計；卡式水份計；卡氏水分儀；卡氏水份儀；卡式水分儀；卡式水份儀；卡氏水分測定儀；卡氏水份測定儀；卡式水分測定儀；卡式水份測定儀；微量水分計；微量水份計；微量水分分析儀；微量水份分析儀；Karl Fischer Moisture Titrator；
什麼是卡爾費歇爾法？
如下面化學反應公式(1)所示，卡爾•費歇爾法使用卡爾•費歇爾試劑測定水分含量，該試劑定量地、有選擇性地與水發生反應。卡爾•費歇爾試劑的組成成分是碘、二氧化硫、鹽基和醇類等溶劑。
I2 + SO2 + 3 Base + ROH + H2O → 2 Base•HI + Base•HSO4R…….(1)
如下所述，這種方法可以用於容量及庫倫滴定系統。
圖1：
庫倫測定庫倫滴定
用庫倫滴定法滴定。將試樣加入電解液中，其主要成分是碘化物離子、二氧化硫、鹽基以及醇類等溶劑。如公式(2)所示，通過電解氧化作月產生碘，直接與卡爾•費歇爾試劑發生反應。
2I--2e→I2…….(2)
按照法拉第定律，碘的產生與電量成正比。這就意味著，含水量可以從電解氧化所需庫倫數直接得出來。
1mg的水=10.71庫倫
如圖1所示，需要兩種類型的庫倫試劑：一種是陽極電解液，置電解槽的陽極室中，另外一種是陰極電解液，置於電解槽的陰極室中。庫倫試劑不需要標定。另一個優點是可以反複使用。
容積滴定容量滴定
在一個燒中放入適合於試樣的脫水溶劑。用滴定劑從該溶劑中轉移所有的水分。然後，加入試樣。用滴定劑進行滴定，滴定量(mgH2O/mL)是事先生確定的。試樣的水分含量由滴定容量(mL)確定的。使用恒定電流極化電壓法檢測終點。圖2顯示了典型的在市場上銷售的自動容積滴定系統的各個組成部分。
AQUAMICRON®是三菱化學株式會社註冊商標。
“日東精工分析科技(前身為三菱化學)集團的子公司API公司”於2002年10月開始成力地開展KF(卡爾•費歇爾)試劑業務。向客戶提供性能卓越的試劑、服務和技術支援，令客戶滿意。
KF(卡爾•費歇爾)試劑-AQUAMICRON在三菱化學的鹿島工廠生廠，工廠的質量系統達到ISO 9001的要求，並得到了第三方認證。
|
| |
 |
CA-310《Volumetric》 |
Highly scalable with maximum 4-channel simultaneous measurement controlled by wide color touch screen.
The system can be applied for a multiude of applications, from simple batch measurement to full automation.
Progressive moisture meter, CA-310 is active in wide range of applications, pharmaceuticlas, foods, oils etc.
|
| |
|
CA-310 Specifications 《Volumetric Moisture Meter》
Measurement method: Volumetric Karl-Fischer Titration,
Up to 4-channel simultaneous measurement (optional)
Titration control: Proportional polarization potential comparator
Detection: Constant current polarization potential
Measuring range: 0.1mg - 999.999mg H2O
Stirring method: Magnetic stirrer
Titration flask: Open vessel with lid, Capacity 150mL
Display: 8.4-inch color LCD touch screen
File memory: Sample parameters: 99
Factor parameters: 99
Schedules: 99
Results: 9,999
Calculation: Concentration calculation, statistical calculation,
recalculation, reanalysis of titration curve
Buret: Syringe type
Volume: 10mL (option 25mL)
Dosing speed: 1mL/ 1.5sec
Aspiration speed: 1mL/ 1.5sec
Accuracy: ±0.02mL (10mL syringe)
Printer: Option, thermal or dot impact
External input and output:
Electric balance: Automatic input of weight
USB: 4 ports
LAN: 1 port
Additional functions: Data integrity (GLP/GMP support), detection
electrode conditioning
Bromine mode: Bromine Index and Bromine Number
Operating conditions: Temperature: 15-40oC
Relative humidity: below 85% ; do not condense.
Power supply: AC 100/115/230/240V (50/60 Hz) 80VA
Dimensions: CA-310MC: Approx. 245(W)× 160(D)× 215(H) mm
CA-310STR: Approx. 120(W)× 340(D)× 135(H) mm
CA-310BRT: Approx. 110(W)× 320(D)× 275(H) mm
Weight: CA-310MC: Approx. 2.0kg
CA-310STR: Approx. 2.5kg
CA-310BRT: Approx. 3.5kg
|
| |
| Options |
|
Sample Boat Type
model VA-300
Various types of plastics, rubber, foods, pharmaceuticals, inorganic salts and other powders and solid samples
Heating temperature: 50~300oC
Heater: Transparent electro-conductive glass 150W
Sample size: Up to 10g
Measuring range: From 5ppm (when used in combination with CA-300)
Carrier gas Nitrogen gas, 0.1~0.5 l/min
Dimensions, Weight: approx. 323(W)× 170(D)× 260(H) mm, 4kg
|
|
|
Disposable Vial Type
model VA-230
Enables easy measurement using disposable vials. Various types of plastics, rubber, foods, pharmaceuticals, inorganic salts and other powders and solid samples
Heating temperature: 70~300oC
Heater: Aluminum block heater 60W×2
Sample size: Up to 10g and 2.5ml volume, vial volume:10ml
Measuring range: From 30ppm (when used in combination with CA-200)
Carrier gas Nitrogen gas, 0.1~0.5 l/min
Gas dryer: Desiccant (Sicapent®) tube, 1
Dimensions, Weight: approx. 300(W)× 135(D)× 220(H) mm, 3.5kg
|
|
|
 Autosamplers and Vaporizers
model VA-236S
Automatic and consecutive measurements up to 33 samples(Vials).Carrier gas is controlled by a mass flow controller, realizing a stable flow rate regardless of the gas pressure.
Platics, rubbers, food products, medical products, inorganic salts, powders, and other solid samples can be measured. Certain oil samples can also be measured using a special needle.
Heating temperature: 70~300oC
Gas flow: 0 to 500ml/min(set from moisture meter)
Carrier gas: Nitrogen gas, <0.01 % moisture
Carrier control: Mass flow controller
Vials(10ml): Total 36, including purge vials
Sample size: <10g and < 2.5ml in volume(solids) < 5ml(oils)
Power supply: AC 100-120V, 200VA/AC220-240V, 250VA
Dimensions: 370(W)*560(D)*400(H) mm
Weight: 18kg
|
|
|
Autosamplers and Vaporizers
model VG-200
Ideal injector for propane, butane, and other liquefied gases. A predefined amount of LPG will be vaporized and injected into the moisture meter.
Applicable gases: Propane. Butane,other liquefide gases(Up to 5 different gas factors can be set)
Injection rate: 100 to 600ml/min
Injection volume: 1 to 99L
Heater temperature: 40 to 90℃
Power supply: AC100-120V, 40VA/ AC220-240V, 20VA
Dimensions: 150(W)*350(D)*270(H) mm
Weight: 6 kg
|
|
|
High Temperatures
model VA-121
Iron ore, clay, metal oxides, inorganic salts
Heating temperature: 250~1000oC
Heater: Electric Furnace (Kanthal wire) 800W
Sample size: Up to 10g (using quartz boat)
Carrier gas Nitrogen gas, 0.1~0.5 l/min
Measuring range: From 10ppm (when used in combination with CA-200)
Gas dryer: Desiccant (Sicapent®) tube, 1
Desiccant (Sicapent®) tube, 2
Dimensions, Weight: approx. 420(W)× 260(D)× 420(H) mm, 15.5kg
|
|
|
High/Low Temperatures
model VA-122
Enables measurement of ancillary moisture. Iron ore, clay, welding rods, metal oxides, inorganic salts
Heating temperature: 70~300oC, 250~1000oC
Heater: Electric Furnace (Kanthal wire) 1000W
Sample size: Up to 10g (using quartz boat)
Carrier gas Nitrogen gas, 0.1~0.5 l/min
Measuring range: From 10ppm (when used in combination with CA-200)
Gas dryer: Desiccant (Sicapent®) tube, 1
Desiccant (Sicapent®) tube, 2
Dimensions, Weight: approx. 690(W)× 290(D)× 410(H) mm, 20kg
|
|
|
| |
|
商 品 其 它 備 註 |
 |
|
|
請選用三菱水份儀專用之 陽陰極液、滴定液、脫水溶劑及標準品…等試劑
VA-300 樣品舟加熱蒸發裝置
